Denim Kevlar Jeans

Are you fed up of sweating away in your leather trousers over the summer, want something different than black textile trousers but still want the protection? Then check out Denim Kevlar Jeans! With the comfort and style of a regular pair of jeans but with the added kevlar protection and in some cases knee armour too!

What is Kevlar? It's a hight strength material that on an equal weight basis is 5 times stronger than steel! Perfect to help protect you while on a motorcycle!

Have you been in and seen our huge range?

And that's just the mens sizes, we also have lots available in ladies sizes and styles too!

We stock 2 ranges of denim kevlar jeans - Red Route and Motohart.

TRAVELLAR KEVLAR JEANS from Motohart

Modern Styled Denim Jean
Kevlar Lined to Seat, Thighs & Knee Impact Areas
Seamless Design for Kevlar Fixing (Looks Normal Accross Knee)
Stonewash & Creased Effects
Armour Pockets to Knees & Hips
Supplied with CE Approved Armour to Knees
Available in Mens Sizes 30-42

Leg lengths available in short and regular

With Red Route we stock several different styles:

The Red Route Ultimate Rider Jeans are tailored for ultimate comfort and versatility within a highly detailed modern cut. These feature adjustable zipped ankles with stretch panelling at the rear and above the knees to ensure maximum rider flexibility, Kevlar lining at all the major impact points, inner removable CE approved shock armour at the knees and a short connecting zip at the rear comes as standard.

The Red Route Street Jean feature a relaxed cut with weathered styling, easy fit, Kevlar lining at all the major impact points and a short connecting zip for jackets at the rear.

Leg lengths are avilable in short, regular and long and prices range from £79.99 to £109.99.

You can see more Red Route Styles available on the Frank Thomas Website here.

So if you are looking for that comfortable pair of jeans with the added protection to use while riding, then make sure you stop by and check out our huge selection of denim kevlar jeans!

Spada Air Mesh Jackets

What do you wear in the summer months? Do you stick to your leathers and sweat away, wear your thick textile winter jacket and regret it or change to an air mesh jacket perfect for the hot days and warm nights?

Here at GMS we wouldn't go without our Air mesh jackets and trousers. As soon as the temperature starts to creep up we get them out of the cupboards!

These Air Pro Jackets from Spada are perefct for English summers as well as for abroad too!

• Summer jacket with mesh panels
• CE approved elbow & shoulder armour
• Rear zip facility
• Twin elasticated arm adjusters
• Soft lined collar, removable quilted lining
• Complete with waterproof over jacket (in rear pocket)
• Two outer pockets
• Sizes - Small to 2XL for men and Small to XLarge for ladies

This really is the only jacket you will need this summer as it is packed with many brilliant features including air mesh breathable fabric that will keep you cool and CE approved shoulder and elbow armour. One key feature that Spada have focused on is to resolve an issue many riders have experienced, even though summer is upon us, nobody can predict the English weather or prevent the rain from spoiling the day. But with the Air Pro Jacket you will never be caught out again as it comes with a Free waterproof over jacket located in a pocket on the rear of the jacket, so if it starts to rain the simply pull it out and pop it on!

The jacket is available to buy in store from G. M.Stevens at only £89.95.

Should this particular jacket not be your style we have a few others that you can take a look at as well as some air mesh trousers!

So make sure you stay cool this summer and make the most of the nice weather while we have it without sweating away and spoiling your ride!

Ugly Fish Sunglasses!

 New to the shop we have the Ugly Fish range of motorcycle sunglasses.

The motorcycle sunglasses range are designed to suit full face helmets, they feature highly flexible and impact resistant frames as well as safety shatterproof lenses. A variety of lens colours are available to satisfy all light conditions and weather, and more importantly you will be protected against the sun's UV rays when you ride. 

The picture below shows our display of the Ugly Fish glasses.

The glasses range from £19.99  up to £39.99. Below we have listed a small sample of the styles available. You can check out more details of the Ugly Fish range on their website here. Please come into the shop to check out all the styles we stock and to purchase.

RS5228 - £34.99

Anti scratch and anti fog coating. Available in Red and Blue Revo.

Flare - £29.99

Anti scratch and anti fog. Available in Clear and Yellow.

Yellow lenses are perfect for maximising contrast in low light conditions, fog and rain. They are also good to use at night to help enhance vision.

 Scout - £19.99

Anti scratch and anti fog.

So if you are looking for some sunglasses/googles suitable to wear with a motorcycle helmet then make sure you pop by and check out the Ugly Fish range!

Motorcycle Battery Care Guide

This is intended as a guide only, please consult your owners manual for individual instructions and care/maintenance requirements.

Motorcycle batteries, if left unused or only used for short rides, will go through the process of self-discharging. They like to be used! If a battery reaches a stage of being deeply discharged then it is often impossible to recover, even if the battery is relatively new.

‘When you start up your bike, the electric starter draws a current from the battery. When you are riding, the alternator will then re-charge what you have 'used'. In normal circumstances the alternator will then provide all the current required by the bike whilst riding. However at times when you are in slow traffic or doing short runs, the alternator will not provide enough current and will start to drain on your battery. Persistent short and slow runs will deteriorate your battery as the alternator will not have the 'time' to recharge what you have used by starting the bike, and what you are pulling from the battery during the short runs. It will take about 10-15 minutes riding at 50-60mph to recharge what you've used starting the bike up.’ Information from http://www.hartside.com.

Regular Charging is the ONLY way to work against the process of self-discharging.

Before charging, ensure that your battery cells are topped up to the recommended level. You need to add distilled or de-ionised water to the cells with low levels. DO NOT use tap water as this contains elements that will permanently damage the battery. Once the battery has been commissioned you should never add any further acid as this will seriously degrade the life of a battery.

Never user a normal car battery charger to charge a motorcycle battery, even for a short time. Car chargers supply far more current than a motorcycle battery can cope with and can very quickly damage the battery plates beyond repair. The absolute maximum charge you should use on a motorcycle battery is about 1 amp.

Info from http://www.motorcycle.co.uk

Charging is best done with the battery removed from the bike. Ensure that the area is well ventilated to prevent the build up of explosive gases.

Connect the battery positive-to-positive and negative-to-negative. Charge the battery according to the manufacturers recommendations.

 

 Types Of Charger

Trickle chargers charge the battery continually at a fixed rate. However, they require a watchful eye, as they do not have a way of responding when a battery is fully charged. Leaving them to charge excessively can damage the battery.

Taper chargers decrease the amount of current delivered through the battery as the voltage rises. As with trickle chargers they require a watchful eye to avoid overcharging. Both taper and trickle chargers are slow.

Optimiser or intelligent chargers monitor and collect feedback from the battery's voltage during the charging process and drop into a standby mode once the battery is fully charged. When the battery naturally discharges to a certain level the charger will go into charging mode and restore the battery to its normal charge. An intelligent charger can be left unattended for long periods of time, but you should still carry out periodic fluid level checks.

Charging a new motorcycle battery

The first charge of a new battery is the most important charge of the batteries life span. Most are dry charged which means they will perform for a short while. If your battery is not fully charged when you first put it on your bike then it starts at a disadvantage.

If you have a dry battery, fill the cells slowly and leave the battery for around half an hour, to allow them to settle and then top up if required. Do not overfill the cells!

The minimum charge should be for at least 8 hours, if the battery during this time gets warm, turn off the charger and wait until it cools down.

It is advisable to put your battery on charge every two weeks using a suitable battery charger. Optimisers are ideal as they will not overheat or over charge your battery.

All of our 6v and 12v batteries can be viewed/ordered from our website here. If you need a new battery but are unsure which one you need then simply give us a call on 01225 767630 and we will look up the required battery for your bike!

All of our battery chargers can be found here and range from £13.99 up to £54.95!

New Helmets

Recently we have had some new retro style crash helmets into the shop from both THH and Viper in full and open face.


Viper - Full Face

Replaceable Anti-Scratch Visor
Multi-Point Venting System
High Comfort Fixed Lining
ECE 22.05 Approved
Seatbelt & Double-D Fastener
Weight 1350+/- 50g
Available in Colours: Black/White, Red/White, Blue/White
Available in Sizes: XS – XL
Price: £45.00

THH - Open Face

Available in Black/White and Black/Orange
Price: £45.00

Pop by the shop to check them out along with loads of other styles, makes and colours.

Workshop Equipment

Here at GMS we stock a large range of workshop equipment including lifts, stands and tools.

Paddock Stands
BikeTek Front and Rear Paddock Stands allow easy and safe lifting of wheels for most repair and maintenance jobs. Extra heavy duty construction, these stands are available in red finish, supplied with front under-fork or rear swingarm cup adaptors. A bobbin hook kit is available for rear stands. Features:
• Spring loaded quick release under fork and cup adaptors
• HD oil resistant wheels
• Protective rubber base bungs

 Front Paddock Stand


Front paddock stands MUST be used in conjunction with a rear paddock stand.
 










Rear Paddock Stand















Front Head Stand 
The BikeTek front head stand folds out to enable a motorcycle to be lifted by the front steering head tube. This offers maximum access to the front end for all repair, cleaning and maintenance work. Each stand is supplied with a kit of 5 of the most popular sized head lift pins covering 90% of motorcycles (including 13mm, 15mm, 16.5mm, 17mm and 18mm). Other larger size pins are available seperately. Pins are easily and quickly changeable, making the stand extremely versatile accross a wide range of bikes.  

Static Rear Stand
This new rear stand from Biketek offers a unique method of motorcycle storage, especially suited for longterm private home storage. A steel support bar is inserted through the rear wheel axle, which is then secured to the stand body. The bike is pushed backwards and raises into position on the stand. 

Cleaning and maintenance work can be carried out when the bike is mounted on the stand (except for tasks that involve removal of the rear wheel) Front paddock stands can still be used in conjunction with the Biketek static stand. Manufactured from 1.4mm steel, 23mm diameter tubing, the stand is a 1pc unit requiring no assembly and offering optimum strength and rigidity. Finished in durable powder-coating and with protective ground-contact bungs.  

Wheel Chock

Tubular wheel chock supports front wheel of bike during storage and transit. Fully adjustable to fit wheels 15” to 18”. Features pivot clamp which locks the front wheel securely by the bike weight.  

 As well as other lifts and motorcycle movers, which you can view on the website here, we can also supply this workshop lift table:

Hydraulic Motorcycle Workshop Lift Table 

Designed to enable efficient and safe access of motorcycles, allowing repairs and servicing, adding accessories and extensive
cleaning.
Suitable for both workshops and home garages.
The table smoothly and safely lifts the motorcycle to an optimum height and position, maximising workshop and garage
space.
Suitable for all types of motorcycles and scooters, front wheel locks into clamp,
bike held stable by centre stand or paddock stand (not supplied).

FEATURES:
• Table size – 2100 X 620mm
• Side and forward locking wheel clamp
• Foot operated hydraulic ram lifts 400kgs from height of 200mm up to 800mm
• Wheel mounted for ease of manoeuvring, with adjustable locking feet
• Locking side safety bars
• Removeable plate for rear wheel access
• Integrated tie-down hook attachment points
• Automatic height-positioning ramp
• Non-slip metal tread plate
• Max load 400kgs 

One lift is usually held in stock at the shop for viewing and local delivery, subject to access limitations. Please contact us before ordering.

They can be delivered directly to you from the wholesaler and are transported in wooden crates via carrier. The driver will need help unloading as they weigh approximately 420 Kgs (ideally fork lift truck).

Tie Down Straps
Available in a range of sizes and types.

Parts Washer - 3.5 Gallon
Parts washers are the perfect solution for cleaning parts and components in any workshop or garage, expelling dirt, grease and oil. An integral electrical pump delivers the cleaning fluid along a directional nozzle to soak the part, making light work of brushing and cleaning.

3.5 Gallon Washer
Dimension 44x36x26cm
Removable internal workshelf

Currently not available on the website.











Pneumatic Creeper Seat
Save your back and knees with this adjustable height creeper seat.
• 360 degree swivel castors
• Tool tray
• Adjustable seat height allows optimum positioning
• 55cm max seat height

 Oil Drain Pans
 Available in different sizes and types.

Vacuum Gauges

Easy Balancing of carburettors for 2 and 4 cylinder machines.

 Impact Driver Set
Impact driver set with 2 crosshead and 2 straighthead attachments.

Draper and Sealey Tools

We also stock a large range of Draper and Sealey Tools including Taps, Dies, Spanners, Sockets etc all available in the shop but not currently online.

Check out the website for other workshop equipment or pop into the shop to see our full and extensive range.